1/2 In. Pex Barb X 3/8 In. Brass Stop Valve

SharkBite Lead-Free Straight Stop. It is used with TV# 608933 Cinch Clamps, need Cinch Tool TV# 608743, or copper crimp rings on cross link polyethylene PEX tubing. After crimping, you can immediately test each fitting to well over 100 psi. NSF listed brass inserts, ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight. It meets AB1953 California & VT S152 Vermont low lead restrictions.

• 1/2 in. Barb Insert x 3/8 in. Brass Barb Insert
• Chrome Plated
• Multi-turn oval handle
• Used with TV# 608933 Cinch Clamps, need Cinch Tool TV# 608743, or copper crimp rings on cross link polyethylene PEX tubing
• After crimping, you can immediately test each fitting to well over 100 phi.
• NSF listed brass inserts
• ASTM F-876, ASTM F-877 to SDR-9 dimensional standards
• NSF 14 & 61 for use in potable water systems
• CSA B137.5 standards
• NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated.
• The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight.
• Meets AB1953 California & VT S152 Vermont low lead restrictions.